Home
Resource
Modeling and planning accelerated life testing with proportional odds
PDF
PDF format is widely accepted and good for printing.
Plug-in required
PDF-1(1.06 MB)
Citation & Export
View Usage Statistics
Staff View

Citation & Export
Hide

Simple citation

Zhang, Hao. Modeling and planning accelerated life testing with proportional odds. Retrieved from https://doi.org/doi:10.7282/T3P55P06

Export

Click here for information about Citation Management Tools at Rutgers.

Statistics
Hide

Description

TitleModeling and planning accelerated life testing with proportional odds
NameZhang, Hao (author); Elsayed, Elsayed (chair); Coit, David (internal member); Pham, Hoang (internal member); Kolassa, John (outside member); Tortorella, Michael (outside member); Rutgers University; Graduate School-New Brunswick
Date Created2007
Other Date2007 (degree)
SubjectIndustrial and Systems Engineering, Accelerated life testing
Extentxiii, 182 pages
DescriptionAccelerated life testing (ALT) is a method for estimating the reliability of products at normal operating conditions from the failure data obtained at the severe conditions. We propose an ALT model based on the proportional odds (PO) assumption to analyze failure time data and investigate the optimum ALT plans for multiple-stress-type cases based on the PO assumption.
We present the PO-based ALT model and propose the parameter estimation procedures by approximating the general baseline odds function with a polynomial function.
Numerical examples with experimental data and Monte Carlo simulation data verify that the PO-based ALT model provides more accurate reliability estimate for the failure time data exhibiting PO properties.
The accuracy of the reliability estimates is directly affected by the reliability inference model and how the ALT is conducted. The latter is addressed in the literature as the design of ALT test plans. Design of ALT test plans under one type of stress may mask the effect of other critical types of stresses that could lead to the component's failure.
The extended life of today's products makes it difficult to obtain "enough" failures in a reasonable amount of testing time using single stress type. Therefore, it is more realistic to consider multiple stress types. This is the first research that investigates the design of optimum ALT test plans with multiple stress types. We formulate nonlinear optimization problems to determine the optimum ALT plans. The optimization problem was solved with a numerical optimization method.
Reliability practitioners could choose different ALT plans in terms of the stress loading types. In this dissertation we conduct the first investigation of the equivalency of ALT plans, which enables reliability practitioners to choose the appropriate ALT plan according to resource restrictions. The results of this research show that one can indeed develop efficient test plans that can provide accurate reliability estimate at design conditions in much shorter test duration than the traditional test plans.
Finally, we conduct experimental testing using miniature light bulbs. The test units are subjected to different stress types. The results validate the applicability of the PO-based ALT models.
NotePh.D.
NoteIncludes bibliographical references (p. 171-179).
Genretheses, ETD doctoral
Persistent URLhttps://doi.org/doi:10.7282/T3P55P06
LanguageEnglish
CollectionGraduate School - New Brunswick Electronic Theses and Dissertations
Organization NameRutgers, The State University of New Jersey
RightsThe author owns the copyright to this work.
Version 8.5.5
Rutgers University Libraries - Copyright ©2024